Training

webED

PMUtube

Resources

categories

Power Quality

Power Quality: What is RMS?
In this video, Jon Bickel will explain what is RMS.
Air Date: 4/6/2016
Power Quality - Introduction
Jon Bickel introduces his Power Quality series and the topics that will be covered in the videos to come.
Air Date: 9/3/2014
Power Quality - Transients
Jon Bickel discusses the power quality phenomena known as Transients, types of transients, and their traits and characteristics.
Air Date: 9/3/2014
Power Quality - Short Duration RMS Variations
Jon Bickel discusses Short Duration RMS Variations, which include: sags, swells, momentary interruptions, and temporary interruptions.
Air Date: 9/3/2014
Power Quality - Long Duration RMS Variations
Jon Bickel discusses Long Duration RMS Variations, which include: under voltage, over voltage, sustained interruption, and current overload.
Air Date: 9/3/2014
Power Quality - Voltage Imbalance
Jon Bickel discusses Voltage Imbalance, which include: causes of voltage imbalance, calculating imbalance, and imbalance ranges.
Air Date: 9/3/2014
Power Quality - Waveform Distortion
Jon Bickel discusses Waveform Distortion and the five primary types, which include: harmonics, interharmonics, notching, noise, and DC offset.
Air Date: 9/3/2014
Power Quality - Voltage Fluctuations
Jon Bickel discusses Waveform Fluctuation and its possible causes.
Air Date: 9/3/2014
Power Quality - Power Frequency Variations
Jon Bickel discusses Power Frequency Variations, frequency deviation, and causes of power deviation.
Air Date: 9/3/2014

Reliability

Reliability: and Power Quality
In this video, Jon Bickel discusses Reliability and Power Quality.
Air Date: 12/8/2015
Reliability: and Maintenance, Part 2
Jon Bickel discusses the second part of his two part video series on reliability and maintenance. 
Air Date: 11/6/2015
Reliability: and Maintenance, Part 1
This is the first part of two videos on Reliability and Maintenance with Jon Bickel.
Air Date: 10/15/2015
Reliability: Operation & Maintenance
In the video, Jon Bickel discusses the Operation and Maintenance of an electrical system.
Air Date: 8/14/2015
Reliability: Installation
In the next video of his series, Jon Bickel discusses the installation portion of reliability.
Air Date: 6/12/2015
Reliability: Of An Electrical System: Part 3
This is the third part in a series of three of Jon Bickel's Design and Reliability topic.
Air Date: 6/12/2015
Reliability: Of An Electrical System: Part 2
This video explains reliability of the electric system. This is the second of three videos on this topic.
Air Date: 5/5/2015
Reliability: Of An Electrical System: Part 1
This video explains reliability of the electric system. This is the first of three videos on this topic.
Air Date: 3/26/2015
Reliability: Outside the Facility: Part 2
Jon Bickel wraps up his discussion 'Outside the Facility' in part 2 of 2.
Air Date: 3/12/2015
Reliability: Outside the Facility: Part 1
This video is part one of two in Jon Bickel's reliability series discussing issues outside a facility.
Air Date: 2/27/2015
Reliability: Inside the Facility
In this video, Jon Bickel discusses reliability within a facility.
Air Date: 2/11/2015
Reliability: Introduction
An introduction to the "Reliability" video series, featuring Jon Bickel.
Air Date: 2/10/2015

Energy Management

What is a Microgrid?
You have heard all the buzz around smart grid. Lets talk microgrid! Just what is a microgrid?
Air Date: 11/21/2013
Introduction to AC (Alternating Current)
In order to discuss electrical systems one must understand the differences between voltage, current, power and energy.  In this video Karl will dicuss the different types of loads that can be …
Air Date: 2/28/2012
Understanding Basic Electricity
This video provides an understanding of the relationships between voltage, current, power, and energy.  Understanding these concepts are essential before using your power monitoring …
Air Date: 2/28/2012
Metering Basics
This video focuses on the basic functions of a meter and how it calculates the data we are used to seeing in our power montioring system. 
Air Date: 2/28/2012
Understanding PTs and CTs
During this video Karl discusses what CTs and PTs are, why there are used in a power monitoring system, and how they are configured.  By watching this video one will understand how CTs and …
Air Date: 2/28/2012
Understanding Energy and Demand
Learn what the difference is between Energy and Demand and how it impacts your power monitoring system
Air Date: 2/28/2012
Understanding Energy and Demand Part 2
In this second part of Understanding Energy and Demand Karl will explain the difference between fixed block demand and sliding window demand.
Air Date: 2/28/2012

Meter Anatomy

Meter Anatomy - Introduction
Karl's discusses what meters do and what their functions they provide.
Air Date: 1/23/2017
Meter Anatomy - Basic Components of a Meter
Karl discusses the basic components that compose a meter. 
Air Date: 1/23/2017
Meter Anatomy - Displays
Karl discusses the different types of displays and options to consider when purchasing a meter. 
Air Date: 1/23/2017
Meter Anatomy - Logging Data
Karl discusses logging meter data on your electrical system. 
Air Date: 1/23/2017
Meter Anatomy - Communications
Karl discusses communciations between your meters and devices. 
Air Date: 1/23/2017
Meter Anatomy - Alarms
Karl discusses capturing alarms on your electrical system. 
Air Date: 1/23/2017
Meter Anatomy - I/O (Input and Output)
Karl discusses input and output capabilities to power meters. 
Air Date: 1/23/2017

Meter Anatomy - Introduction Posted on Jan 23, 2017

Description:
Karl's discusses what meters do and what their functions they provide.

Submit Question

No questions have been posted yet.
Click to Rate:
Average User Rating:
21 Rating(s)

*If you are experiencing any trouble playing a video, please refresh the page, or turn on/off compatibility mode.*